top of page
New stamp

Available may 2023

Benefits

​

  • 'Star-wired' phase, neutral and earth for best performance

  • Protects all four contacts by the Pulse Protector inside

  • IEC C13 input connector gives the freedom to use preferred power cord

  • Two HF filtered output sockets

  • Field blocking Copper Cage

  • Smallest high-end power strip available 

Mains Multiplier Myni 6

Current Conductor S - High-end audio power supply cable with Schuko and C13 connector
Myni Conductor 8 - High-end audio power supply cable with C14 connector and C7/figure 8 connector
Myni Conductor IEC - High-end audio power supply cable with C14 connector and C13 connector

What to expect?

 

An improvement in dynamics, a much better sound image and a lower hum level. The sound character of your audio system remains, fortunately!

 

By using the Mains Multiplier Myni 6 with integrated Pulse Protector your equipment has less trouble with electrical failures induced by distortion on your network, and it is better protected against damage through lightning impact nearby. A guarantee that lightning impacts will not damage your devices can not be given because the energy-content is too high.

Where to use?

 

Wherever you need to connect multiple loads to the mains, a Mains Multiplier is a wise choice. Of course you will have to use high performance power cords, else a Mains Multiplier will not perform at its best. It's a combination of factors, only if you use a Mains Multiplier in combination with high performance power cords you will have the maximum results for your audio system.

 

The Mains Multiplier Myni 6 is specifically designed to be positioned next to your audio equipment. This is possible by an integrated cage of Faraday made out of pure copper, which has excellent conductive characteristics. This luxurious addition is one of a kind within the world of high end audio in this price range.

Working principle

 

The Mains Multiplier Myni 6 is not a regular multiple socket but more a work of art. The results speak for themselves, optical as well as electrical. 

​

The type of outputs is chosen because of the high contact pressure, which becomes obvious when putting in or pulling out electric plugs. Increased contact pressure and optimal contact surface create a low resistance value. This is indispensable for great power distribution. 

​

The wiring for phase, neutral and earth is connected by a star principle. Every output has its own wiring towards the feed cable. Peaks in the current or interference signals that appear on the earth contacts of one socket will now have less effect on the other sockets. 

​

A ‘Pulse Protector’ is integrated behind the IEC input connector. This prevents peaks and pulses to reach your audio equipment. Our Pulse Protector is also available as a separate tool, please check our website.

Selection of filtered outlets Mains Multiplier 6

Filtered outputs

Unique output connectors

 

The Mains Multiplier Myni 6 uses connectors never seen before in high end audio power strips. The IEC contacts provide remarkable contact pressure, ensuring superior electrical conduction. More contact pressure and an optimal contact surface do create a low resistance value which is very important for a good power distribution.

​

​

IEC C14 connector on the Mains Multiplier Myni with fuse
IEC C13 connector used on the Mains Multiplier Myni

IEC C14 Connector

IEC C13 Connector

​

 

Phase-Neutral, Phase-Earth

and Neutral-Earth

250 Volt

2500 Volt

4500 Ampere

3x65 Joule

<25 nanoseconds

5 Ampere

5 Ampere

244.4(l) x 54(w) x 43(h) in mm

????kg

Specifications

 

Protecting: 

​

Maximum voltage:

Maximum peak voltage:

Maximum peak current:

Maximum peak energy:

Response time:

Maximum continuous current per socket:

Maximum total current:

Dimensions:

Weight:

Fuse holder

​

The Mains Multiplier Myni 6 has a built-in slot for a fuse. This fuse, additional to the pulse protector inside, will protect your equipment and the multiplier itself from malfunctions. The slot is easily accessible from the top of the product. When replacing the fuse, make sure the multiplier is disconnected from the mains supply.

​

​

Size DOES matter

​

Everything always appears larger in pictures than they are in reality. That is why we can't emphasize this enough; This mains multiplier is the smallest high end audio multiplier in the world. In combination with the copper cage and flexible cables you are able to place this product right next to your audio equipment.

​

​

Mains Multiplier Myni - High-end audio power supply strip 0742288391837

+

Current Conductor S - High-end audio power supply cable

+

Myni Conductor IEC - High-end audio power supply cable

+

Myni Conductor IEC - High-end audio power supply cable

1.5m input cable

50cm output cable

75cm output cable

Vector of IEC C13 connector

The Mains Multiplier Myni 6 is supplied with a power cord. Additionally, we've also included two output cables for the connection between the Mains Multiplier Myni and your audio equipment. 

​

Here you can download the manual for the Mains Multiplier Myni 6  manual-mmm.pdf

bottom of page